mardi 31 octobre 2017

HYDAWAY collapsible water bottle review

I’ve always been a big fan of space-saving gadgetry and have become quite skilled at minimalistic travel. I typically carry a collapsible bowl, titanium spork, and an inflatable water bottle. The water bottle was lightweight, but difficult to clean and prone to leakage.  Most of the deficiencies have been addressed with HYDAWAY collapsible bottles. HYDAWAY offers lots of color choices, multi-packs, and travel cases and sent me green and orange as samples. 

Two brightly colored, kid-size and large-size, bottles recently graced my mailbox, packaged in a simple white cardboard box with HYDAWAY’s droplet logo gracing the cover. Inside, a sicker with simple instructions was ready to greet me.  Packaging for the bottles is minimal, with only a cardboard card held in place between the bottle and cap. Everything is recyclable. I appreciate sparing the trees.

Unscrewing the top releases the bottle from packaging captivity. Reattaching the cap provides a tight seal. So tight, in fact, that it’s not possible to expand the bottle’s accordion frame without opening the spout or loosening the lid.  The bottles themselves have a sturdy feeling plastic base and cap. The 21-ounce bottle sports another plastic ring around its midsection when fully deployed. The rest of the bottle is comprised of an accordion-formed rubbery material that is pleasant to the touch.  The bottles are BPA free and top-rack dishwasher safe. Since the opening is quite large, I have little doubt that my dishwasher would have trouble getting all of the innards clean.

The 12-ounce bottle is widest at the bottom, leaving the center of gravity very low which will help avoid spills. The only issue I found with this configuration is the base is too large to fit into the cup holders in my cars. The 21-ounce model expands in both directions and isn’t quite as stable, has a wide enough base to stand independently.  It also fits very nicely in vehicle cup storage. Because the bottom of the cup doesn’t touch the bottom of the cup holder, its weight sits near the middle of the bottle and it’s quite stable, much more so than your average bladder-busting big-gulp, even on the tightest interstate off-ramp.

The bottles squish down to about an inch thick and four inches in diameter. I love the compact size. Interestingly, the small and large bottles are the same size when collapsed. How do they do that? It must be some kind of magic. When compacted, they’re a little larger in diameter than a hockey puck and shouldn’t pose much of a problem tucked into the most efficient carry-on, diaper bag, or glove compartment. Having one of these handy means never having to pay $45 for a bottled water in an airport ever again. Besides, when collapsed, I doubt even the most zealous TSA agent would protest taking these bottles through x-ray. However, with the plastic and rubbery construction, these bottles aren’t insulated so plan on room temperature beverages if you plan on carrying them full for any length of time. A tepid libation is better than none in my book.

Alternatively, the wide openings and tight seals lend themselves perfectly to snack time. Pack these babies full of Goldfish Crackers or Cheerios and have the little ones content through the longest car ride, church service or parent-teacher meeting.

My only real concern is the size. For most, I’m sure they would suffice, but for me, I typically have a mighty thirst and 21 ounces is a bit small. I hope at some point they offer a larger size. Yep, a railroad tank car size would be dandy! HYDAWAY collapsible bottles are well made, compact, alternatives to bulky water bottles.  Ideal for travel, they are sure to reduce the number of plastic bottles lurking in landfills. The 21 ounce, large size, has already found its way into my carry-on bag.

Source: The sample for this review was provided by HYDAWAY. Please visit their site for more info and Amazon to order.

Filed in categories: Reviews

Tagged:

HYDAWAY collapsible water bottle review originally appeared on The Gadgeteer on October 31, 2017 at 11:00 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://ift.tt/1nJlrA1 in order to ensure continuous delivery.



HYDAWAY collapsible water bottle review

Mint SIM pairs up with Best Buy to offer 3 Months of free phone service & data

Mobile service provider Mint SIM and BestBuy.com have partnered together to announce a promotion offering new customers three free months of Unlimited Talk & Text including 2GB of 4G LTE each month.

The promotion comes with the purchase of any unlocked device from BestBuy.com with a 7-Day Risk Free Intro Offer. Mint uses the T-Mobile network for their service so as long as you have good T-Mobile coverage in your area, Mint will work great.

“We are thrilled to expand our partnership with Best Buy and bring a truly breakthrough offer to the market,” said Aron North, SVP of Marketing & Creative at Mint SIM. “Combining Best Buy’s enormous unlocked phone selection with Mint Sim’s free service on America’s Fastest Growing LTE Network is truly a win-win.”

“More and more consumers are choosing unlocked phones every day. Mint SIM’s growth has been remarkable and encapsulates how consumers are changing their buying habits when it comes to wireless,” North continued. “As the industry continues to evolve we believe Mint SIM is well positioned to capitalize on these new buying trends.”

For more information about Mint SIM and this new promotion with Best Buy, please visit this special BestBuy.com offer page.

Filed in categories: News

Tagged:

Mint SIM pairs up with Best Buy to offer 3 Months of free phone service & data originally appeared on The Gadgeteer on October 31, 2017 at 10:00 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://ift.tt/1nJlrA1 in order to ensure continuous delivery.



Mint SIM pairs up with Best Buy to offer 3 Months of free phone service & data

Computers for Seniors – New from No Starch Press


New from No Starch Press: Computers for Seniors by Chris, Carrie, and Cheryl Ewin. This 332-page full-color illustrated book for the parent, grandparent or older friends in your life that can benefit from easy step-by-step basic computer lessons. The book has 14 lessons that begin at square one with the power button and proceed to sharing images with family, watching crazy cat videos on YouTube, and go up to how to stay safe on the internet, and more.

Computers for Seniors is available now from No Starch Press where you can order a hard copy of the book for $24.95 or a digital copy for $19.95

Filed in categories: News

Tagged: ,

Computers for Seniors – New from No Starch Press originally appeared on The Gadgeteer on October 31, 2017 at 9:00 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://ift.tt/1nJlrA1 in order to ensure continuous delivery.



Computers for Seniors – New from No Starch Press

Parrot’s new Bebop-Pro Thermal drone knows if you’re hot or not

The Parrot Bebop-Pro Thermal is Parrot’s newest drone that isn’t being marketed as a “toy” like the Parrot Swing Drone that I reviewed this past spring. This drone is a tool for people in construction, firefighters, search, and more. What makes this drone different from all the other $1500 price range drones on the market? The Bebop-Pro Thermal uses FLIR thermal imaging technology.

The Bebop-Pro Thermal has two embedded cameras. There’s a 14MP HD video camera and a FLIR ONE thermal imaging camera. The HD video camera can be used for normal visual inspection of roofs, structures, etc. and the FLIR camera can detect a 10° to 160° temperature range which it displays through the Parrot FreeFlight Thermal app.

Thermal images display from red (160°) to blue (10°) in the app for quick identification of thermal losses. I’m sure you can imagine how this would come in handy for building inspectors and search and rescue workers who may be looking for survivors during a natural disaster, storm, etc.

The Bebop-Pro Thermal will be priced at $1500 and will be available in November. Visit parrot.com for more info.

Filed in categories: News

Tagged:

Parrot’s new Bebop-Pro Thermal drone knows if you’re hot or not originally appeared on The Gadgeteer on October 31, 2017 at 8:00 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://ift.tt/1nJlrA1 in order to ensure continuous delivery.



Parrot’s new Bebop-Pro Thermal drone knows if you’re hot or not

lundi 30 octobre 2017

Miccus Home RTX 2.0 Long Range Wireless Audio Transmitter or Receiver review

Back in May, I reviewed the Miccus Home TX Pro long-range wireless audio transmitter which allows you to transmit a Bluetooth signal up to 160ft. Pairing it with their SR-71 Stealth low latency headphones made it perfect for my late night TV viewing. Fast forward five months and Miccus has a new product, the Home RTX 2.0 Long Range Wireless Audio Transmitter or Receiver. The RTX 2.0 is similar to the TX Pro but as the name implies it also acts as a Bluetooth receiver. I had the chance to review a unit for the Gadgeteer.

In the box

  • Miccus Home RTX 2.0
  • Dipole Antenna
  • Optical / TOSHLINK digital audio cable
  • 3.5mm male to 3.5mm male audio cable
  • Micro USB charging cable
  • USB power supply
  • Users Manual

Specifications

  • Bluetooth v4.2 (compatible with Bluetooth v2.0 or higher), Profiles – A2DP, AVRCP
  • Audio codecs: SBC, AAC, aptX, aptX-LL, (NOTE aptX-LL use requires both devices in a pairing to support the aptX-Low Latency codec).
  • 3.5mm Stereo Audio Input and Output, TOSLINK Digital Optical Input and Output.
  • Operating range: up to 160ft (50M), Operating Frequency: 2.4 GHz.
  • Optical Support: Sample Rate <=48KHz, Formats PCM / LPCM, Dolby Digital 2.0 (Format changes are accessed thru your TV’s audio settings menu)

What is it?

The Miccus Home RTX 2.0 is the first dual-link, long-range wireless transmitter or receiver featuring Bluetooth v4.2 and two simultaneous aptX Low Latency audio streams. Basically, the Home RTX Pro 2.0 acts as a hub for all your wireless home audio. With the 2-in-1 flexibility of a Transmitter or Receiver, the Home RTX 2.0 makes it easy to add multiple long-range Bluetooth audio links to your home setup. It has two different modes, Transmit (TX), and Receive Mode (RX) and features Dual-Link Pairing and Optical Audio Pass-Through.

Transmit Mode (TX)

With the Home RTX 2.0 powered off, select TX mode by pressing and latching the RX/TX switch (located on the back left of the Home RTX 2.0) to the in position. TX mode requires a wired audio source connection, to either the 3.5mm audio input or the TOSLINK/optical audio input. You can use an audio input source like a computer, tablet, smartphone, television or stereo system. For my purposes, I connected the RTX 2.0 to my TV using the TOSHLINK digital optical cable. I chose to power the unit using the provided Micro USB charging cable and one of my TV’s vacant USB ports. When connected via USB the Home RTX 2.0 will automatically power on. If powered off you can power it back on by holding the multi-function/power button for 5 seconds until the LED indicators power on.

Connecting the Home RTX 2.0 to my TV allows me to use it as a wireless audio hub for my living room. Using Transmit Mode (TX) I can listen to video audio sound or music from my TV and connected 4K Apple TV through my Bluetooth headphones; great for my late night TV viewing or listening to music from my iTunes library. With the RTX 2.0’s long-range transmitter connection is never a problem. The manual states that the operating range of the Home RTX 2.0 is up to 160ft. In my testing, I was able to walk 215ft outside my house before I started losing the Bluetooth signal and had great connection throughout my entire house.

I also connected my Amazon Echo Dot to the Home RTX 2.0 and with the unit in RX mode I was able to use the Dot to play music and news through my TV’s soundbar. With the unit in TX mode, I was able to use my Dot as a Bluetooth speaker and stream audio from my TV and connected devices to whatever room the Dot was in.

Note: If television or video audio is your primary use, then I would recommend using Bluetooth headphones/speakers that support the aptX Low Latency codec. I use a pair of Miccus SR-71 Stealth low latency headphones I reviewed earlier and they work great for watching movies, shows, and sports without any lip sync issues.

Receive Mode (RX)

With the Home RTX 2.0 powered off, Select RX mode by depressing and unlatching the RX/TX switch to the out position. RX mode is designed for use with an audio device such as a stereo system or powered stereo speakers connected to either the 3.5mm audio output or the TOSLINK optical audio output on the Home RTX 2.0. In RX mode the Home RTX 2.0 can be used with any device capable of transmitting a Bluetooth wireless audio signal. Including phones, tablets, laptops, and PCs. I used RX mode to play music from my iPhone through my TV’s sound bar and it worked flawlessly. There’s even a friendly voice prompt that tells you when the unit is powered on, when it’s in pairing mode, when it’s connected/disconnected to or from a device, and when it’s powered off.

In RX mode two smartphones or tablets can be simultaneously paired with the Home RTX 2.0. Both devices can also simultaneously stream music to the Home RTX 2.0. To hear audio from only one of the two devices, pause the audio, or use muting or adjust volume. To test this feature I paired both my iPhone and iPad Pro to the unit. I was able to stream audio from both devices to my sound bar and it worked surprisingly well. I’m not sure that I would use this feature very often, but it could come in handy if I ever wanted to try my hand at DeeJaying a party or family get together.

Dual-Link Pairing

Dual-link pairing allows for two Bluetooth receiving or transmitting devices to pair with the Miccus Home RTX 2.0 simultaneously. Pair with two Bluetooth speakers, headphones or 2 phones at the same time. Pairing is quick and easy. To Engage pairing mode on the Home RTX 2.0,  press and hold the multifunction/power button for 3 seconds until the CH light begins fast flashing. I won’t bore you with the rest of the details here, however, if you want to learn more I provided a link to the Users Manual.

The Home RTX 2.0 also has an automatic re-connect feature. If left powered on, or if powered back on it will automatically reconnect to the last paired device when within range.

Optical Audio Pass-Through

Most televisions and stereo systems feature only one optical audio output. The Home RTX 2.0 allows you to receive an optical audio feed from a television or stereo system and transmit and stream that audio feed to two pairs of headphones or Bluetooth speakers simultaneously. The Home RTX 2.0 can then pass that same audio onto a soundbar. You can also use it to link to two or more Home RTX 2.0’s together to double, or triple the amount of low latency audio streams available for use. This is my favorite feature of the Home RTX 2.0. Digital-pass through allows me to listen to my TV through either the soundbar or my Bluetooth headphones without having to switch cables or use an optical audio splitter. It even allows for one person to use headphones while the other listens to audio through the soundbar.

Conclusion

I’m not surprised that I like the Miccus Home RTX 2.0. I use the Home TX Pro that I reviewed earlier on an almost nightly basis. With the added feature of being both a long-range transmitter and receiver along with Optical Audio Pass through this device is a nice upgrade. And with its small size and discreet black case, it blends in nicely on my TV stand.

Whether you want to Transmit or Receive wireless audio throughout your home or to the patio, pool or backyard the Miccus Home RTX 2.0, which is priced at $59.99,  is the perfect compliment to any home AV system. Miccus also offers a 2-year No-Hassle Replacement Warranty.

Source: The sample for this review was provided by Miccus. Please visit their site for more info and Amazon to purchase.

 

Product Information

Price: $59.99
Manufacturer: Miccus
Retailer: Amazon
Pros:
  • Acts as both receiver and transmitter
  • Long range up to 160ft
  • Easy to set up and use
  • Dual-link pairing
Cons:
  • None

Filed in categories: Reviews

Tagged: ,

Miccus Home RTX 2.0 Long Range Wireless Audio Transmitter or Receiver review originally appeared on The Gadgeteer on October 30, 2017 at 10:07 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://ift.tt/1nJlrA1 in order to ensure continuous delivery.



Miccus Home RTX 2.0 Long Range Wireless Audio Transmitter or Receiver review

Felix Gray eyeglasses promise to fix all the bad things screens do to your eyes

OK, that title may be a bit over the top. But if you’re like the typical Gadgeteer, you spend much of your work and leisure in front of some sort of screen, whether it’s coding, IT support, financials, or just a hot & heavy FPS. Even the classic “Netflix & chill” brings with it staring into the bright eyes of the evil LCD, unless you’re using your TV. There have been studies galore condemning this modern pariah, but Felix Gray, an eyeglass manufacturer, promises relief. Their glasses are designed to protect your eyes from the 400-440 nm range of blue light, which (according to their website) is the most dangerous. Increased exposure to blue light in this range results in poorer sleep, blurred vision, dry eye, headaches and eye fatigue.

Felix Gray does not offer prescription lenses as yet, but they do offer a slight magnification for reading assistance and there are several styles to choose from with prices starting around $95.

Filed in categories: News

Tagged: ,

Felix Gray eyeglasses promise to fix all the bad things screens do to your eyes originally appeared on The Gadgeteer on October 30, 2017 at 9:00 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://ift.tt/1nJlrA1 in order to ensure continuous delivery.



Felix Gray eyeglasses promise to fix all the bad things screens do to your eyes

Braven (finally) makes a headphone

Ever since I began reviewing Braven’s Bluetooth speakers, I’ve always told my friends that because Braven knows Bluetooth so well, they should make a headphone. Well, now they have—the Braven Signature Wireless Headphone.

Braven’s slogan is “Music On, World Off.” Engineered with active noise canceling technology, their Signature Headphones deliver 32 hours of audio. An adjustable, padded leather headband is finished with integrated aluminum cooling technology to push out heat accumulated during use for a cooler listening experience. Free from background noise and free from wires, the Signature Wireless Headphones feature a fully functional speakerphone with smart ear pad swipe controls to handle phone calls, adjust volume or skip tracks forward and backward. They fold flat into a ballistic nylon carry case to take wherever you want to go.

The Braven Signature Wireless Headphone is available from Braven for $199.99 US. Visit www.braven.com for more information.

Filed in categories: News

Tagged:

Braven (finally) makes a headphone originally appeared on The Gadgeteer on October 30, 2017 at 8:00 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://ift.tt/1nJlrA1 in order to ensure continuous delivery.



Braven (finally) makes a headphone

dimanche 29 octobre 2017

Sarvi smartphone dock, MAGNO INK pen, GoSun Go solar stove, and more – Notable crowdfunding campaigns

This week I’m bringing you five crowdfunding campaigns that include four products introduced on Kickstarter and one project that is running on Indiegogo. Click through to read more details about these five crowdfunded products.

Sarvi Dock. Designed for Apple and Android devices.

blurb by Andy Jacobs

What is it?
A simple, sleek, minimalist design dock for smartphones and tables with tons of versatility and adaptability.

Why do I like them?
The main reason (among several) that I like it: Sarvi Dock claims to be compatible with “every possible combination of smartphones/tablets with protective cases and docks available.” Every? Well, it claims to fit the likes of Lifeproof, Otterbox, Catalyst, Apple, Spigen, Mophie, and many more. Its elegant “S”-shaped back with soft-touch coating provides solid support for your phone and its design allows unobstructed use of your phone’s speakers as well as audio jack while docked. Its Cable Connect System includes three easily-to-swap connector adapters that cover the vast majority of phones and tablets: Apple Lightning, Micro USB a, d USB C. It’s compatible with wireless charging pads, has a landscape mode and can act as a USB thumb drive reader as well. Finally, it comes with Sarvi Valet, a small stand that holds the unused Cable Connect adapters and the Landscape Kit. Is there a downside to the Sarvi Dock? I haven’t found one yet. I’m excited about this one.

Where can I find more info?
The Kickstarter campaign is in full swing and will end December 1, so there is still time to become a backer. As of this writing, the campaign still has 32 days to go and already achieved over $19,000 of its $20,000 pledging goal. Pledge package pricing starts at $28 for a single early bird Sarvi Dock and increases from there. Estimated delivery is March 2018. Visit their Kickstarter page for all the details.

Bento Stack for Apple Accessories

What is it?
The Bento Stack is a stackable storage system for cables, chargers, USB flash drives, adapters, wireless headphones, Apple Pencil, Apple Watch bands and other gear that you want to keep organized.

Why do I like them?
I like the Bento Stack because it helps keep all your “stuff” neat and tidy instead of a mess at the bottom of your gear bag. I have used small zippered pouches to keep my gear organized, but the Bento Stack looks like a nice alternative to pouches because you can arrange the storage compartments on your desk when you’re using the gear allowing you to see all the items. Pouches aren’t quite that useful.

Where can I find more info?
The Bento Stack campaign ends in 19 days and they have already passed their funding goal of $25,000. You can pre-order a Bento Stack starting at $38. After the Bento Stack campaign ends, rewards are estimated to start shipping in December 2017. Visit their Indiegogo page for all the details.

MAGNO INK: The World’s Most Intelligent Magnetically Energised Pen.

What is it?
MAGNO INK is an ink pen made of aluminum that uses Neodymium magnets to retract and extend the writing tip.

Why do I like them?
Because magnets! The MAGNO INK pen looks like a nice EDC pen that can accept popular D1 style refills. The magnetic mechanism means you don’t have to worry about losing the cap. It has been designed so it won’t roll off your desk and it also looks like a fun fidget toy.

Where can I find more info?
The MAGNO INK campaign ends in 46 days and they have already met their funding goal of $7,877. You can pre-order a MAGNO INK starting at $40. After the MAGNO INK campaign ends, rewards are estimated to start shipping in March 2018. Visit their Kickstarter page for all the details.

Universal 3.0 Credit Card EDC Multi Tool 60+ Tools in One.

What is it?
The Universal 3.0 is a multi-tool that has over 60 tools but is compact enough to store in your wallet or pocket.

Why do I like them?
I like the Universal 3.0 because it offers a wide variety of tools from wrenches and screwdrivers which are common for multi-tools, to the not so common axe, protractor, sundial clock and compass, and much more.

Where can I find more info?
The Universal 3.0 campaign ends in 15 days and they have already met their funding goal of $5,000. You can pre-order a Universal 3.0 starting at $23. After the Universal 3.0 campaign ends, rewards are estimated to start shipping in February 2018. Visit their Kickstarter page for all the details.

GoSun Go: Boil Water and Cook Meals with Solar Power

What is it?
The GoSun Go is a portable stove that uses the power of the sun to cook your food and boil/sterilize water.

Why do I like them?
I’ve talked about GoSun products before, but this new product is smaller and much easier to take with you on your adventures. The GoSun Go gives you the ability to cool food using no fuel (wood) or batteries. All you need is the sun even if it’s cloudy and cold.

Where can I find more info?
The GoSun Go campaign ends in 23 days and has already reached their funding goal of $10,000. You can pre-order a GoSun Go starting at $99. After the GoSun Go campaign ends, rewards are estimated to start shipping in April 2018. Visit their Kickstarter page for all the details.

Filed in categories: News

Tagged:

Sarvi smartphone dock, MAGNO INK pen, GoSun Go solar stove, and more – Notable crowdfunding campaigns originally appeared on The Gadgeteer on October 29, 2017 at 4:04 pm.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://ift.tt/1nJlrA1 in order to ensure continuous delivery.



Sarvi smartphone dock, MAGNO INK pen, GoSun Go solar stove, and more – Notable crowdfunding campaigns

Snag a copy of “How to Build an Effective and Affordable Smart Home from the Ground Up” (Free eBook)

How to Build an Effective and Affordable Smart Home from the Ground Up written by Joel Lee is an electronic guide that will teach you what you need to know about smart home technology, including what it is, how it works, and which devices to purchase or avoid.

If you haven’t already signed up previously with TradePub, there are a couple hoops to jump through before you can download this ebook. But your small effort helps The Gadgeteer to earn some affiliate fees that enables us to bring you more cool product reviews, giveaways, and more, so your effort will be greatly appreciated.

Filed in categories: News

Tagged:

Snag a copy of “How to Build an Effective and Affordable Smart Home from the Ground Up” (Free eBook) originally appeared on The Gadgeteer on October 29, 2017 at 2:34 pm.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://ift.tt/1nJlrA1 in order to ensure continuous delivery.



Snag a copy of “How to Build an Effective and Affordable Smart Home from the Ground Up” (Free eBook)

(Hopefully) the third time is the charm: Apple Watch Series 3 review

The title says it all… I’ve purchased both the Series 1 and Series 2 Apple Watches, taking them both back within Apple’s no-questions-asked return window. Each time going into the relationship starry-eyed and hopeful. But ultimately determining that I didn’t need Apple’s smartwatch or I missed my old school timepieces. Well, oops I’ve done it again, the Series 3 was calling my name and I finally gave in and pulled the trigger. For this write-up, I won’t be diving very deep into the specs (that’s all over the Net) but more into the experience as an old (emphasis on Old…) time watch guy who loves tech gear and fitness. 

I find that as I near 50, my workouts have become less frequent and not nearly as epic as back in the day. While I stay in decent shape, old age is winning. It is my hope that an Apple Watch will help stem the tide and enable me to raise the bar. Being an AR number cruncher, I find the real-time data a smartwatch gives me both nagging and motivating.

After getting over the hump of whether or not to buy a Series 3, the next question is which Apple Watch would satisfy me the most. As I said, I am a long time watch guy. While (a bit) unnecessary in today’s world of smartphones, I enjoy the feel/heft of a timepiece on my wrist. The aluminum and glass Apple Watch always felt a bit light to me, lacking the weight I have come to prefer. So, long story short, I decided to splurge and get the stainless steel black sport Apple Watch with sapphire glass screen. The stainless steel watch is only available with LTE, which I don’t know if I’d have chosen if given the choice. But overall, I walked away with little to no regrets, that deep down I know I would have if I had purchased the base model.

I have benched my classic timepieces and been using the Apple Watch for a few weeks. It really has motivated me to do more. In my hectic life, I find myself walking the stairs in my building more, hopping on the elliptical more often before settling down for dinner, and most importantly…finding the time/energy/motivation to run more.

Theoretically, any smartwatch could do this for you (or better yet sheer willpower) but our family lives in the Apple ecosystem and the Apple Watch only adds to the seamlessness of that world. The watch makes an excellent companion for all my Apple devices from my iPhone to my MacBooks. WatchOS 4.0 and built-in LTE has definitely improved the smartwatch experience making the latest Apple Watch as close to an iPhone on your wrist (or Dick Tracy) that you can get these days. There are several LTE enabled Android/Tisen watches on the market but they’re bulky and lack the refinement of the Apple Watch.

Well, long story short, I’m keeping the Apple Watch Series 3 for the following reasons: refinement, material/build quality, enhanced Apple ecosystem experience, and added motivation. I’m still up in the air about activating T-Mobile LTE on it but I’ll continue to ponder the usability and potential impact on battery life (which I currently find stellar, with 75% power remaining on a typical day and more than 50% on a running & streaming music day). Overall, I truly like the watch and have promised myself I won’t look back or wear my other watches till I lose 10 pounds and hopefully rekindle my workout mojo. Wish me luck 😉

Source: The sample for this review was purchased with my own funds. Please visit their apple.com for more info.

 

Product Information

Price: $649
Manufacturer: Apple
Pros:
  • Excellent material/build quality
  • Best smartwatch OS to date
  • Enhanced Apple ecosystem experience
  • Great motivational tool
  • Built-in LTE
Cons:
  • Expensive

Filed in categories: Reviews

Tagged: , ,

(Hopefully) the third time is the charm: Apple Watch Series 3 review originally appeared on The Gadgeteer on October 29, 2017 at 10:23 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://ift.tt/1nJlrA1 in order to ensure continuous delivery.



(Hopefully) the third time is the charm: Apple Watch Series 3 review

Jewelry by Johan’s Doodle Ring is a ring for fidget fans

Last month, my wife and I celebrated our 25th wedding anniversary and renewed our vows. As part of the ceremony, we exchanged new “spinner” rings I bought in Israel. I chose these rings because I’m constantly fiddling with my wedding band. If you share my affinity for band twisting, Jewelry by Johan’s Doodle Ring might be for you. 

The ring is comprised of interwoven arcs of metal that pivot together. It’s fascinating to watch the YouTube video. The motion of the ring is really quite beautiful. It’s expensive at $925, but no more so than comparable digit adornments. Unique and innovative, but I wonder, how well it will hold up over time?

Visit Jewelry by Johan for more info.

Filed in categories: News

Tagged:

Jewelry by Johan’s Doodle Ring is a ring for fidget fans originally appeared on The Gadgeteer on October 29, 2017 at 8:55 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://ift.tt/1nJlrA1 in order to ensure continuous delivery.



Jewelry by Johan’s Doodle Ring is a ring for fidget fans

samedi 28 octobre 2017

Casetify Apple Watch band, Shinola knife, ENOD Mini Ring earphones, and more – Weekly roundup

It’s time to relax with your computer, tablet, or phone while you browse through a list of everything that we wrote about this week on The Gadgeteer. We have news, we have reviews, and we have articles about your favorite gadgets. Click through to enjoy.

Reviews

Articles

News

Filed in categories: News

Tagged:

Casetify Apple Watch band, Shinola knife, ENOD Mini Ring earphones, and more – Weekly roundup originally appeared on The Gadgeteer on October 28, 2017 at 6:30 pm.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://ift.tt/1nJlrA1 in order to ensure continuous delivery.



Casetify Apple Watch band, Shinola knife, ENOD Mini Ring earphones, and more – Weekly roundup

MyHeritage DNA review

Due to my German last name, I’ve always been interested in my ancestry and would daydream what it might be like to visit Germany someday and look up Strietelmeiers in the phone book. I love the TV series Finding Your Roots and Who Do You Think You Are? When I was offered the chance to review the MyHeritage DNA kit, I was excited to find out my results.

What is it?

The MyHeritage DNA kit helps you collect your DNA to reveal where your ancestors came from and can help you create your family tree by finding DNA matches.

What’s in the box?

2 cheek swabs for DNA collection
2 vials to store the DNA
1 Ziploc baggie
1 padded envelope
Instructions

Activating and collecting DNA

To get started, you first are instructed to activate the kit by going online and typing in a serial number that is unique to each kit.

Then you just follow the simple instructions.

The MyHeritage DNA collection kit is very easy to use. It doesn’t require you to collect blood or spit in a tube like other kits from competing DNA services. The MyHeritage kit has two swabs that you rub inside each cheek for 30 seconds each and then break off in each vial.

The vials then go inside the plastic bag.

And the plastic bag goes inside the addressed mailer. I was surprised that the mailer requires that you have to pay the postage to ship it back to the MyHeritage labs.

As you can see from the image above, your account on the MyHeritage site shows each step in the process from the time you order a kit, activate it, mail it and finally receive the results.

The worst part of the MyHeritage DNA service is waiting. Their website says that the results can take 3-4 weeks and their instructional video says the results can take 4-6 weeks. I mailed my test kit to MyHeritage on 7/31/17 and I finally received my test results on 10/20/17. That’s 11 weeks and 4 days, which I think you would have to agree is insanely long.

Was it worth the wait?

When you click on the link to view your results, there’s a cool animation of the Earth that revolves around as it shows you where your ancestors are from. You are then presented with a top level list of regions and the percentage that makes up your DNA. No big surprises with my ancestry… darn it.

You can drill down even farther into each area.

The MyHeritage DNA results include more than just showing you where your DNA comes from. It can also help you find relatives and build your family tree.

The site will pull up your DNA matches and review information about the matches and then add them to your family tree if they are actually part of your family.

Some of the information even includes pictures of long gone relatives.

This information comes from a variety of sources and does not have to be from someone that has also done the MyHeritage DNA test. For example, the MyHeritage site had my grandmother who I don’t even remember because she died when I was 1 year old. But her info was on the site so I could add it to my family tree.

Researching genealogy is fun and fascinating. The MyHeritage site links out to census records and old newspaper clippings that you can search by name and year. But the only problem is that you have to pay extra if you want to view that info.

I think MyHeritage should give you a month or two of free data access to those extra services instead of requesting that you pay extra for them.

Final thoughts

If you’re into genealogy, then you’ll enjoy the information that you can get from the MyHeritage DNA kit. Just be prepared to wait a LONG time for the results and pay extra for features that will help you build your family tree.

Source: The sample for this review was provided by MyHeritage. Please visit their site for more info.

 

Product Information

Price: $99.00
Manufacturer: MyHeritage
Pros:
  • Easy and painless to collect DNA
  • Site has access to lots of genealogy information
Cons:
  • Takes a long time to get the results back
  • Have to pay extra to access newspaper, military, census, and other records

Filed in categories: Reviews

Tagged: ,

MyHeritage DNA review originally appeared on The Gadgeteer on October 28, 2017 at 5:16 pm.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://ift.tt/1nJlrA1 in order to ensure continuous delivery.



MyHeritage DNA review

Julie’s gadget diary – Thoughts after spending a week in paradise with a Pixel 2 XL, LG V30, and a Nextbook 2-in-1 laptop

We just returned home last night from a week on Sanibel Island, Florida where we vacation almost every year. This year I packed pretty light tech-wise. I only took 3 smartphones and a Windows 10 2-in-1 laptop. The phones were my new Pixel 2 XL, the LG V30 which I’m reviewing and a tiny Android smartphone called the Jelly which I’m also reviewing. For this trip, I left my 12″ MacBook at home so I could spend a full week using the Windows 10 Nextbook Flex 11a convertible laptop/tablet which I’m also reviewing.

When we checked into our condo, I tried to make a call only to notice that my Pixel 2 XL and no signal. My heart sunk because we had just switched from Verizon to T-Mobile and I was bracing for Jeanne to give me grief about the switch. So I grabbed the LG V30 which is on loan from Verizon Wireless and checked the signal on it and it only had one bar.

I don’t remember having issues with cellphone coverage other times that we’ve spent there on the island. But this time both the LG V30 on Verizon and my Pixel 2 XL on T-Mobile had really crappy coverage. Maybe it was due to Hurricane Irma, but we could barely get a signal in our condo. Luckily the condo had decent WiFi. When we were out and about on the island, the signal of both Verizon and T-Mobile was fine (for the most part).

During the week all the news about the Pixel 2 XL screen problems starting coming in and I read several articles, but honestly, I think the issues are blown out of proportion. I hadn’t noticed any of the issues until I read about them. The blue tint problem when you tilt the Pixel 2 XL screen is the only issue so far that is the most obvious to me. I can see the same issue on the LG V30 and very slightly on the original Pixel XL. But I don’t tilt my phones back and forth when I use them, I look directly at the screen. I feel like this is a non-issue (at least for me).

The issue with the non-vibrant colors is also a non-issue for me. I can understand if you were a Samsung phone user going to a Pixel 2 that you would notice a difference. But I had been using an original Pixel for a couple of weeks before getting my Pixel 2 XL and I didn’t notice any problems with the colors. When Google releases the 8.1 update to Oreo, which is supposed to have a toggle to fix the vibrancy issue, I’ll see if I can tell a difference. But for now, I’m fine with the colors.

I also haven’t noticed the “dirty screen” issue in low light or the burn-in issue with the virtual nav buttons at the bottom of the screen. Neither of those issues is obvious to my eyes, but I’ll definitely make sure to look into this issue as I work on my Pixel 2 XL review.

In my last gadget diary post, I mentioned that I had recently switched from an iPhone back to Android and from Verizon to T-Mobile and that I was even thinking of switching from a MacBook to a Windows laptop. But before I pulled the trigger on that switch, I wanted to do a trial run first so instead of taking my 12″ MacBook to Sanibel with me, I took the Nextbook Flex 11a 2-in-1 laptop/tablet with me. I figured it would be a good test to see if I could live with a Windows 10 device and a convertible device before committing to switching.

So how did it go using the Nextbook and Windows 10 all week? Let’s just say that I’m so glad to be back home on my little 12″ MacBook. The Nextbook (full review coming soon), packs a LOT of features into a very inexpensive laptop/tablet, but oh my goodness is it slow. At least it was at the condo and at the Fort Myer’s airport. I still need to use it here at home before passing my final judgment. But for now, I am glad to be home and back on my MacBook. So soooooo glad. I’m not looking forward to going back to work next week though. 😉

Filed in categories: Articles

Tagged:

Julie’s gadget diary – Thoughts after spending a week in paradise with a Pixel 2 XL, LG V30, and a Nextbook 2-in-1 laptop originally appeared on The Gadgeteer on October 28, 2017 at 10:41 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://ift.tt/1nJlrA1 in order to ensure continuous delivery.



Julie’s gadget diary – Thoughts after spending a week in paradise with a Pixel 2 XL, LG V30, and a Nextbook 2-in-1 laptop

Apple quietly introduces its new MacBook leather sleeve

Friday while many of us, including myself, were pre-occupied with staying up late or getting up early (depending on which time zone you’re in) in hopes of scoring the newest iPhone, Apple quietly introduced another new product. In fact, it’s the first of its kind ever made by Apple. The new Leather Sleeve for the 12‑inch MacBook.

Now we all know Apple makes all manner of cases for the iPhone and iPad, but this is the first case/sleeve they’ve ever made for a MacBook. The Sleeve is crafted from high-quality European leather with a soft microfiber lining. Its design also allows you to charge your 12-inch MacBook while it’s kept protected inside the sleeve. And it even has the iconic Apple Logo emblazoned on the top. The New $149 12-inch MacBook Leather Sleeve is available right now in two colors, Saddle Brown and Midnight Blue. Visit apple.com for more info and to order.

Filed in categories: News

Tagged: ,

Apple quietly introduces its new MacBook leather sleeve originally appeared on The Gadgeteer on October 28, 2017 at 8:30 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://ift.tt/1nJlrA1 in order to ensure continuous delivery.



Apple quietly introduces its new MacBook leather sleeve