lundi 6 mars 2017

BeatsX Wireless Earphones review

It feels like ages ago when the iPhone 7 was officially announced, putting to rest the rumors on whether or not it would do away with that ubiquitous feature that graces almost every mobile device… the headphone jack. In classic Apple fashion, their self-described bold move was backed by a new wireless audio technology that would quickly be found in several of the popular Beats earphones, the W1 chip.

I believe it was in November when the BeatsX were shown off and finally, three months later, I was finally able to secure a pair for myself. Not because it was in short supply… they were simply delayed that long. I assume it was to add some cushion for Apple to sell its own diminutive AirPods. So here’s the big question… were they worth the wait? So very much.

I should address this W1 chip right off the bat. What’s the big deal? The W1 is a standard Bluetooth receiver, compatible with any other Bluetooth device, but when paired with an iPhone, iPad, Apple watch or iMac, it gains several important improvements. Once you connect the earphones to one of your Apple products, it’s automatically paired with all your devices signed in with the same iCloud account. Switching the device the earphones are connected to takes one simple tap. The chip also massively increases the range. I was easily able to leave my iPhone on my desk and walk around the entire office without losing a signal.

Only a handful of earphones utilize this technology so far — several other Beats products and Apple’s AirPods, which were in short supply at launch — and this technology is, to me, what made the BeatsX worth the wait. But what about the actual headphones, themselves? Let’s get into it.

Contents of Beatsx Packaging

All those earbud options!

Here’s what’s in the box:

  • BeatsX earphones
  • Eartips with four size options
  • Removable secure-fit wingtips
  • Pocket-sized carrying case
  • Lightning to USB-A charging cable
  • Quick start guide

The unit that I purchased also came with a promotion for 3 free months of Apple Music. I’m already a subscriber, but was able to convert the offer value into iTunes store credit, which was just like chopping money off the cost of the earphones and moving it into apps I’ll eventually buy, anyway. Pretty good deal.

One of my favorite features in any earphone I’ve tried, the magnetic clasp.

As for the earphones themselves, they are extremely lightweight, seem rather sturdy and sweat/water resistant. The earbuds form a good seal and didn’t shake loose while jumping around and shaking my head. They’re designed for sports, workouts, running, biking… anything where a long cable would be considered a nuisance. I don’t do a lot of that right now, being winter and living in the northeast, but I imagine when it’s warmer and I start jogging again, they’ll go with me.

Inside the earbuds are two small magnets that clasp together to keep them from swinging around when they’re not in your ears. This is probably my favorite feature of any earphones I’ve owned. I have a fair amount of talk time at work, so it’s nice to be able to keep my earphones around my neck, lanyard-style, when I’m engaged in a conversation or walking around the office, and go right back to listening in one quick motion.

On one cord, there is a simple volume clicker with a center button for answering calls and music controls. The mic is located on this bit and hangs close enough to your mouth to pick up normal conversation levels.

They stay out of the way and don’t sway around too much.

The earphones have an interesting construction. There’s a flexible neck strap that rests on the back of your neck, kept in place by the weight of the two battery packs on both sides. One of the battery packs houses the power/pairing button with a tiny charging indicator LED. The other has a Lightning port for charging, which is fantastic. I have several Lightning cables at work, in my car and at home, so an opportunity for a battery top-off is close at hand.

The battery life is quite good… eight hours on a full charge. The Beats brand touts what they call Fast Fuel rapid charging, giving them the ability for 2 hours of battery off a 5 minute charge.

You’re probably thinking by now, “Yeah, okay, that’s a lot of really neat stuff, but how do these things actually sound?”

I mean, that’s kinda of the whole point, right? I wouldn’t consider myself an audiophile by any stretch of the imagination, but as a casual earphone user, I’d award them a solid B. They’re not the best, in terms of clarity, but they’re certainly a step up from any stock earphones that you’d get with a phone or a wired pair you’d drop $50 on.

Beats have always been punchy and bass-heavy, and while the tiny drivers in these are surprisingly loud, they tend to be a little too muddy for my taste. The highs aren’t as crisp as I’d like, but overall they sound pretty good. The sound certainly benefits from the earbud construction, forming a tight seal in your ear canals. They do block quite a bit of outside noise, even when nothing is playing, so that’s something to keep in mind for traffic safety if you’re going to be biking or running or, I don’t know, walking on some railroad tracks. Take heed!

It’s the combination of the W1 chip, smart construction and good sound that makes the BeatsX an easy recommendation at $129. That may be a tall order for some looking for a simple pair of earphones. While the headphone jacks of the world don’t seem to be going anywhere in a big hurry, any future iPhone I’ll be purchasing will certainly be devoid of that option, and I sure do hates me some converter dongles. For me, wireless is the way to go, and these came in at a much lower price than many of the other options out there.

Source: The sample for this review was purchased with my own funds. For more information, visit the Beats by Dre site and Amazon to order.

 

Product Information

Price: $149.95
Manufacturer: Beats by Dre
Retailer: Amazon
Pros:
  • W1 chip = simple pairing and super long range
  • Decent sound
  • Long battery life
  • Lightning cable charging
Cons:
  • Relatively expensive
  • Not the best sound you could get for the price vs. wired earphones

Filed in categories: Audio, Video, TV, Reviews

Tagged:

BeatsX Wireless Earphones review originally appeared on on March 6, 2017 at 11:49 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://ift.tt/1nJlrA1 in order to ensure continuous delivery.



BeatsX Wireless Earphones review

360 degree wearable camera, Apple Airpod jewelry, and more – Notable crowdfunding campaigns

This week I feature two Kickstarter and two Indiegogo crowdfunding campaigns that I think are interesting or downright weird. Click through to see this week’s collection of notable crowdfunding campaigns.

Beoncam: The 1st Ever Removable 360 Wrist Camera

What is it?
The Beoncam is a wearable 5MP camera that can take 360-degree images and video from your wrist.

Why do I like it?
I like the Beoncam because it’s always on and ready to shoot an image or capture video without having to wait for it or an app to boot up. The wearable also functions as a watch and it is splashproof so you can capture video and images in the rain. An optional waterproof case can be purchased for $19 if you want to go swimming with it.

The camera pairs with an app on your phone to live stream or share images and video with friends.

Where can I find more info?
With 25 days left in their campaign, The Beoncam campaign has already met their funding goal of $30,000. You can pre-order a Beoncam starting at $119. After the Beoncam campaign ends, rewards are estimated to start shipping in July 2017. Visit their Indiegogo page for all the details.

Erling – The first jewelry for Apple Airpods

What is it?
The Erling is a piece of magnetic jewelry that doubles as a holder for your Apple wireless Airpods. No, I’m not kidding. It comes in silver or gold and has a distinctly feminine design. That’s not to say that guys might not want one too…

Why do I like it?
I like the Erling because it’s weird. Honestly, I wouldn’t actually wear this product, but I couldn’t help but want to tell you about it because I know there are people out there that might think it’s cool.

Where can I find more info?
With 24 days left in their campaign, The Erling campaign has work to do before they will be able to ready their funding goal of $7,500. You can pre-order an Erling starting at $55. After the Erling campaign ends, rewards are estimated to start shipping in April 2017. Visit their Kickstarter page for all the details.

Clarity: Alexa & Android Touchscreen Smart Speaker

What is it?
The Clarity is a portable Bluetooth speaker that can be controlled with your voice or through the built-in touch screen display.

Why do I like it?
I like the Clarity because it is powered by Android (only v5.1 though) and also has Amazon’s Alexa built in. You can use it as a speaker to listen to streaming music from your favorite services like Pandora or Spotify. Or music stored on a micro SD card. You can also watch movies through the built-in 7″ display.

Where can I find more info?
With 25 days left in their campaign, The Clarity campaign has work to do before they will be able to ready their funding goal of $50,000. You can pre-order a Clarity starting at $119. After the Clarity campaign ends, rewards are estimated to start shipping in June 2017. Visit their Indiegogo page for all the details.

Mondo+

What is it?
The Mondo+ from Grace Digital is an internet radio with access to over 30,000 radio station from around the world and it also has Chromecast built-in.

Why do I like it?
I like the Mondo+ because it can work with Google Home. You can say “Ok Google, play Bruno Mars to Mondo” and if you change the name of the speaker you can say something like “Ok Google, play Jake Shimabukuro on my kitchen speaker.”

With the built-in Chromecast, you can stream your favorite music, radio, or podcasts from your mobile device to the Mondo+.

The Mondo+ can also be used as a clock radio.

Where can I find more info?
With 25 days left in their campaign, The Mondo+ campaign still has work to do to reach their funding goal of $50,000. You can pre-order a Mondo+ starting at $150. After the Mondo+ campaign ends, rewards are estimated to start shipping in April 2017. Visit their Kickstarter page for all the details.

Filed in categories: News

Tagged:

360 degree wearable camera, Apple Airpod jewelry, and more – Notable crowdfunding campaigns originally appeared on on March 6, 2017 at 9:47 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://ift.tt/1nJlrA1 in order to ensure continuous delivery.



360 degree wearable camera, Apple Airpod jewelry, and more – Notable crowdfunding campaigns

DecaTxt one-handed Bluetooth keyboard review

What do all QWERTY keyboards have in common from the large clickity clackity USB keyboards to the smaller wireless keyboards? They all have dozens of keys. But less is more right? If that’s your motto then I don’t think you’ll ever look at another traditional keyboard again once you see the DecaTxt one-handed Bluetooth keyboard.

What is it?

The DecaTxt is a one-handed Bluetooth keyboard that has only 10 keys, but those 10 keys provide all the same letters, numbers, punctuation symbols, function keys and even some media control keys that a full-size traditional keyboard has, but in a form factor that is about the same size as a deck of cards.

Design and features

The DecaTxt keyboard looks like some sort of game or puzzle device with all the letters and graphics printed on it. But it’s really a fully functioning keyboard that has a total of only 10 keys.

There are 8 hard plastic keys on the front. Each key has good travel and tactile feedback. Printed on the keys are two letters. The top letter is what you get if you press the key all by itself and the bottom number is what will be typed if the number lock is enabled. Below each key are two more letters in red and blue. The red letters will be typed when the E key on the top edge is held while the key is pressed and the blue letters will be typed with the F key on the top edge of the DecaTxt is held down while a key is pressed. Then there are even more characters printed next to each key.

The E/6 and F/5 keys are used to switch to the second and third set of alphabet keys and are also used like a shift button if you press them at the same time, let go and then press the desired letter.

Yes, that’s a mini USB port that you see on the bottom edge of the DecaTxt keyboard and I was just as surprised as you probably are to see it.

Fully charging the keyboard takes between 2 – 4 hours and will power the keyboard for about a week. During charging, a faint red LED below the D/0 key will light up.

On both sides of the keyboard are rough sandpaper-like strips that help you grip and hold the keyboard against your side, leg, etc while typing on it.

Using the DecaTxt keyboard

To use the DecaTxt with your computer, phone, tablet, etc, you first have to charge it using a mini USB cable. When charging is finished, you can then press a key on the keyboard to wake it up and then go into the Bluetooth settings on your device to search for DecaTxt in the Bluetooth devices. When you select that device, it will pair and vibrate 3 times to let you know it’s connected.

The DecaTxt is held in one hand, left or right with the E and F keys facing up and the rough edge resting against the fleshy pad of your palm below your fingers. The other side of the keyboard should then be pressed against your side, leg, hip, etc to anchor it.

In this position, you’ll easily be able to use your 5 fingers to press letters A through Z. A through J can be printed with a single finger press. To get K through R, you need to hold down the E button, press the key and then release both keys. S through Z uses the same procedure, but with the F key held down.

So, following that logic, if you wanted to type the word “cat”, you would press the C key with your ring finger, press the A key with your index finger, hold down the F key with your thumb while pressing the B key with your middle finger and then release both keys.

If I had wanted to capitalize one of the letters, I would have needed to press both the E and F keys at the same time, released them and the pressed the desired letter. If I had wanted to capitalize the T, I would have needed to press the E and F at the same time, released them, held down the F key and the pressed the B key.

With a little practice, I was able to type single words with little effort, but not with a lot of speed.

But things get infinitely more complex when you add numbers, punctuation and other symbols into the mix. Luckily, pretty much everything you need to figure what key to press to type the desired character or symbol is printed right on the keyboard itself. Notice the colored bars next to the keys and the colored symbols printed next to the keys? This is your built-in guide.

Can you figure out how to do that by looking at the image above? Give up? The # symbol is gray and there’s a gray bar next to the C key. So you hold the C key with your ring finger, press the D key with your pinky and voila!

See the $ symbol next to the I key? Notice how there are two $ symbols on top of each other? One is gray and one is pink. Do you know how to type it? You have to hold down the C and the D while pressing the I. Yes, it’s getting more complicated.

What about spacing, pressing enter, and backspacing? To insert a space you have to hold your thumb down on the E and F keys on the top edge of the DecaTxt and press the A key with your index finger. You can also hold down all three keys to continuously space. To backspace, you hold down the E and F and press the G key. The backspace will also repeat if you hold down all three keys. The enter key is typed by pressing the A and G keys at the same time.

Final thoughts

Using the DecaTxt keyboard is not physically difficult, but it could be considered mentally difficult because you need to remember the various key press combinations to type punctuation characters, symbols, numbers, etc. There is a definitely learning curve with the DecaTxt once you get past typing letters A through Z.

I can imagine that the DecaTxt would be really useful for someone with just one functioning hand or someone who needs to type while walking around. But for someone like me who is at a desk all day, it feels much slower and error prone compared to using a traditional keyboard. But then again, I don’t think a typical desk jockey is who the DecaTxt has been designed for.

Would you use a keyboard like the DecaTxt one-handed Bluetooth keyboard?

Source: The sample for this review was provided by DecaTxt. Please visit their site for more info and Amazon to order.

 

Product Information

Price: $125.00
Manufacturer: Decatxt
Retailer: Amazon
Pros:
  • Small
  • Can use with one hand
  • Can be used with either hand
Cons:
  • Expensive
  • Learning curve
  • Charges via mini USB

Filed in categories: Bluetooth Gear, Computer Gear, Reviews

Tagged:

DecaTxt one-handed Bluetooth keyboard review originally appeared on on March 6, 2017 at 6:30 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://ift.tt/1nJlrA1 in order to ensure continuous delivery.



DecaTxt one-handed Bluetooth keyboard review

dimanche 5 mars 2017

Axess “Superior” Extended Vegetable Tanned Leather RFID-blocking V-shaped wallet review

I am on a quest for a great leather wallet. I really enjoy using my Garzini Essenziale Finestra wallet, but are there others out there that I might like better? When the Gadgeteer was offered an Axess leather wallet to review, I volunteered to do so. I chose the Axess “Superior” Extended Vegetable Tanned Leather RFID-blocking V-shaped wallet because I need a lot of pockets for the number of cards I carry. How did it measure up to my Garzini wallet?

Design & Quality

The Axess “Superior” Extended RFID-blocking V-shaped wallet came in a very nice black box, wrapped in a black sheet of non-woven polypropylene material (or poly non-woven which is the same material used in reusable grocery bags).

The Axess “Superior” Extended wallet is a professional looking wallet that is handmade using full grain vegetable tanned Tuscany leather and measures 8 cm x 11 cm. The Tuscany leather is supposed to age well and develop a rich patina over time. The leather is smooth and has a wonderful smell and color. It is also very thin to minimize the amount of space the wallet takes up. Even though the wallet appears to be well made, because the leather is so thin, the wallet does not have a very robust feel.

This wallet has three credit card slots on the front with a side slot to the right of them. The thread used in this wallet is a “polyester/cotton corespun thread. The edges are hand cut.”

The back of the Extended version of the “Superior” wallet has another three credit card slots with a side slot as well, whereas, the non-extended version does not have these.

The wallet has two RFID-blocking pockets, one of which is the side slot on the front of the wallet as shown above on the left. The second of the RFID-blocking pockets is the side slot on the back of the wallet (above on the right).

RFID stands for radio frequency identification. According to creditcards.com,

RFID is actually the granddaddy of NFC and a generic term for technologies that use radio waves to identify people or objects. It also refers to the long-range communication technology that’s used in, for example, highway toll payment devices.

But NFC is a type of RFID that requires you to be within inches of the card reader, so fraudsters cannot skim your information easily. Still, as use of NFC-enabled mobile payments grows, contactless payment cards are being phased out.

Thus, if you are using contactless cards that allow you to wave your card over a card reader, then you may want an RFID-blocking wallet. Even though your information may be emitted from the chip on such a card, it usually requires that you be within inches away from the card reader and thus a thief would have to be that close to steal your information.

EMV (stands for Europay, Mastercard & Visa) is the current standard used in credit card chips today and requires direct contact with the card reader (the chip looks like that in the photo above). These cards require you to insert the chip end of your card fully into a card reader and they use tokenization which means that such a card “transmits a unique code for each transaction” thus making “it nearly impossible to counterfeit the card” according to creditcards.com. (Mobile wallets like Android Pay and Apple Pay also use tokenization). When using EMV chipped cards, you would not need to have an RFID-blocking wallet.

Anyway, continuing on with my review. In addition to the four slots on each side of the wallet, there is a V-shaped center pocket that holds paper money. This V-shaped opening allows the user easy access to the bills.

Each of the pockets (the paper money slot, the RFID slots, and the six credit card slots) is lined with a shiny nylon or polyester type of material. The lining of each of the pockets feels like it is covering a thin layer of cardboard to provide rigidity.

The wallet has a slim profile and is about 5 mm thick when empty. The uniformity of every aspect of this wallet makes it look like it is mass produced rather than handmade.

Use

In the front of the wallet, I inserted three plastic cards into the credit card slots and also inserted one plastic card into the RFID-blocking side slot. In the center slot, I had only one $20 bill.

On the back of the wallet, I inserted two plastic cards in the top and bottom credit card slots and three paper cards into the center slot. I also inserted two paper cards into the side slot.

With all of my necessities inserted, the wallet ended up measuring about 7/8″ thick.

Final Thoughts

The Axess “Superior” Extended Vegetable Tanned Leather RFID-blocking V-shaped wallet appears to be a well-made wallet and uses vegetable tanned Tuscany leather which develops a unique patina over time. New, it already has a wonderful color and smell. It is what I would describe as a professional looking businessman’s type of wallet. The wallet, being constructed so uniformly, has the appearance of being a mass produced wallet even though the website says Axess wallets are handmade. It also does not have a very robust feel to it so I cannot say how long it will last.

The V-shaped center opening is useful for easy access to your paper money, however, I found that the wallet expanded freely on the open side and was, therefore, less compact than I would like it to be. This, of course, is a matter of personal preference. Axess offers a handful of different styles of wallets and knowing what I know now about the opening, I may have been happier with the “Smooth” – Extended Vegetable Tanned Leather RFID-blocking compact wallet (caramel).

If you like professional looking leather wallets with the V-shaped style center pocket to hold your paper money, you are sure to enjoy using the Axess “Superior” wallet, however, I personally prefer my Garzini wallet.

Source: The sample used in this review was provided by Axess. Please visit their website for more information or to purchase one. You can also find their wallets on Amazon.

 

Product Information

Price: $45.00
Manufacturer: Axess
Retailer: Amazon
Pros:
  • Well-made wallet using full grain vegetable tanned Tuscany leather
  • Beautiful color and wonderful leather smell
  • Has two RFID-blocking pockets
Cons:
  • V-shaped pocket allowed the wallet to expand too much for my taste

Filed in categories: Reviews, Wallets

Tagged:

Axess “Superior” Extended Vegetable Tanned Leather RFID-blocking V-shaped wallet review originally appeared on on March 5, 2017 at 9:53 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://ift.tt/1nJlrA1 in order to ensure continuous delivery.



Axess “Superior” Extended Vegetable Tanned Leather RFID-blocking V-shaped wallet review

Yale Real Living Assure lock with Bluetooth review

Did you know that Amazon can clean your house, paint a room and more?

Amazon Home Services offer customers in select locations over a thousand different services from quality, hand-picked professionals and is backed by the Amazon Happiness Guarantee.

Need your house spruced up for a family event and don’t have the time or don’t want to do it yourself? No problem, just book a 3-hour cleaning session on Amazon and a professional cleaner will arrive clean your bedrooms, bathrooms, empty the trash, mopping, and more. A typical cleaning session in Indianapolis Indiana has an estimate of around $90 for 3hrs. A super duper spring cleaning that includes washing interior windows is a little over twice that price at $212 for a 6-7 hour session.

Once you book the session and select 3 preferred dates and times, the Amazon Home Services professional will contact you via email or by phone to confirm the appointment. Payment for the service is billed to the card you have on file in your Amazon account.

Amazon backs up their Home Services with a Happiness Guarantee.

Learn more about and try Amazon Home Services.

Filed in categories: News

Tagged:

Did you know that Amazon can clean your house, paint a room and more? originally appeared on on March 5, 2017 at 6:00 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://ift.tt/1nJlrA1 in order to ensure continuous delivery.



Did you know that Amazon can clean your house, paint a room and more?

samedi 4 mars 2017

Action cameras, fidget toys, iPhone cases that can print pics and more – Weekly roundup

It’s time to grab your favorite beverage, find a comfortable chair and browse a list of everything that we’ve posted in the past week. We have news, reviews and articles for your reading pleasure. Enjoy!

Reviews

Articles

News

Filed in categories: News

Tagged:

Action cameras, fidget toys, iPhone cases that can print pics and more – Weekly roundup originally appeared on on March 4, 2017 at 6:00 pm.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://ift.tt/1nJlrA1 in order to ensure continuous delivery.



Action cameras, fidget toys, iPhone cases that can print pics and more – Weekly roundup